pp1101sb & pp1101sc 1 05171.r2 10/03 www .protekde vices.com thyristor surge suppressor only one name means protektion? applica tions ? slic line card ? dbx branch exchange switches ? fcc part 68 customer premise equipment ? line interface modem ? isdn architecture interface iec compa tibility (en61000-4) ? 61000-4-2 (esd): air - 15kv, contact - 8kv ? 61000-4-4 (eft): 40a - 5/50ns ? 61000-4-5 (surge): 8/20s - 95a, l4(line-gnd), 48a, l4(line-line) & 83a, l2(power) fea tures ? complies with: fcc part 68, ul 1459, bellcore 1089, itu-k.20 & k.21 ? peak off-state voltage 80 volts ? surge current capability (see table 1) ? esd protection > 40 kilovolts ? unidirectional configurations mechanical characteristics ? molded plastic do-214aa package ? weight 2.5 grams (approximate) ? flammability rating ul 94v-0 ? 12mm tape and reel per eia standard 481 ? marking: logo, marking code & polarity band or notch on top surface 05171 do-214aa device symbol (unidirectional) series i pp 2 x 10s amps i pp 10 x 160s amps i pp 10 x 560s amps i pp 10 x 1000s amps i tsm 60 hz amps di/dt amps/s (see note 1) sb sc 300 500 150 200 100 200 80 100 32 60 500 500 table 1 - surge ratings 2000 2000 dv/dt amps/s (see note 1) note 1 : critital rate of rise for on-state current (di/dt) and off-state voltage (dv/dt).
2 www .protekde vices.com 05171.r2 10/03 pp1101sb & pp1101sc device characteristics maximum ratings @ 25c unless otherwise specified symbol value units parameter amps c c c/watt c/watt c/watt c/watt surge current - 50/60 hz junction temperature storage temperature thermal resistance(junction) - sb series thermal resistance(junction) - sc series thermal resistance(ambient) - sb series thermal resistance(ambient) - sc series i tsm t j t stg r qjc r qjc r qja r qja 60/32 -40 to 150 -55 to 150 28 26 90 85 figure 2 v-i characteristic curve i pp i tsm i s i h i drm v s v t v drm i t 0 1 2 3 t - time - s 0 50 100 i pp - peak pulse current - % of i pp test waveform parameters t f = 10s t d = 1,000s t f peak value i pp e -t figure 1 pulse wave form t d = t i pp /2 electrical characteristics per line @ 25c unless otherwise specified pa r t number repetitive peak off-state voltage v drm volts switching voltage @100v/s v s volts pp1101sb pp1101sc 80 120 device marking code minimum holding current (see fig. 7) di/dt = 1a/ms i h ma switching current i s ma maximum off-state current (see fig. 4) @v drm i drm a maximum on-state voltage (see fig. 5) @i t v t volts on-state current i t amps typical capacitance @50v, 1 mhz c pf 1.0 1.0 5 5 5 5 800 800 150 150 130 130 95 95 js jt
3 www .protekde vices.com 05171.r2 10/03 pp1101sb & pp1101sc graphs figure 4 typical peak off-state current vs junction temperature -40 0 40 80 120 t j - temperature - c 10 1 0.1 0.01 i drm - peak off-state current - a figure 5 typical on-state current vs on-state voltage 0 1 2 3 4 5 6 7 v t - on-state voltage - v i t - on-state current - a 100 10 1 figure 6 typical normalized v s vs junction temperature -40 0 40 80 120 t j - temperature - c 1.15 1.1 0.9 0.8 normalized v s 1 1.05 0.95 0.85 figure 7 typical holding current vs junction temperature -40 0 40 80 120 t j - temperature - c 2.5 1.5 0.5 0 i h /i h (t j 25c) 2 1 figure 7 on-state current vs surge current duration surge current duration - full cycles 1 10 100 1,00 0 1 10 100 non-repetitive on-state current (i tsm ) - amps ppxxxxsb ppxxxxsc
4 www .protekde vices.com 05171.r2 10/03 pp1101sb & pp1101sc copyright ? protek devices 2003 specifications: protek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except jedec). design changes: protek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer?s and that in furnishing engineering and technical assistance, protek assumes no responsibility with respect to the selection or specifications of such products. package outline & dimensions protek devices 2929 south fair lane, tempe, az 85282 tel: 602-431-8101 fax: 602-431-2288 e-mail: sales@protekdevices.com web site: www .protekde vices .com tape & reel ordering nomenclature 1. surface mount product is taped and reeled in accordance with eia-481. 2. suffix-t13 = 13 inch reel - 3,000 pieces per 12mm tape, i.e., PP1101SB-T13. outline & dimensions: rev 0 - 4/02, 06030 package outline a b c d e f g h 2.21 3.94 4.57 2.50 1.52 5.59 0.20 0.31 0.077 0.130 0.160 0.079 0.030 0.205 0.004 0.006 0.087 0.155 0.180 0.098 0.060 0.220 0.008 0.012 1.96 3.30 4.06 2.00 0.76 5.21 0.10 0.15 dim min max min max millimeters inches dimensions do-214aa (smb) notes 1. dimensions are exclusive of mold flash and metal burrs. a b c d f g h e
|
